大型飞机铰链下垂前缘多段翼型气动优化设计与研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Aerodynamic Optimization Design and Research on the Hinged Droop-nose Multi-element Airfoil for Large Aircraft
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    随着增升装置的发展,新型商用飞机机翼内侧采用了结构简单的铰链下垂前缘,与使用最多的前缘缝翼相比,它具有减阻降噪,提高升阻比等优点。针对大型飞机铰链下垂前缘翼型进行了气动优化设计及数值研究。首先设计出铰链下垂前缘的二维翼型,然后通过iSIGHT平台对翼型进行气动优化,分析铰链下垂前缘翼型的低速气动特性,并且得出最佳翼型,最后与前缘缝翼翼型的气动性能进行对比,说明使用铰链下垂前缘的可行性。

    Abstract:

    With the development of high lift devices, hinged droop-nose with simple structure is used inside the wing of the new commercial aircraft. Compared to the most common slat, it can reduce drag and noise, improve lift-drag ratio and so on. In this paper,aerodynamic optimization design and computational investigation on the hinged droop-nose airfoil for large aircraft is studied. First, a two-dimensional airfoil for hinged droop-nose is designed.Then airfoil aerodynamic optimization through iSIGHT platform is conducted. The low speed aerodynamic characteristics of the hinged droop-nose airfoil are analyzed and the best airfoil is obtained. At last, compared with slat in terms of aerodynamic performance,and so the feasibility of the hinged droop-nose is verified.

    参考文献
    相似文献
    引证文献
引用本文

王一帆、田云、刘沛清、王宇晨.大型飞机铰链下垂前缘多段翼型气动优化设计与研究[J].民用飞机设计与研 究,2014(1):11-Wang Yifan、Tian Yun、Liu Peiqing、Wang Yuchen. Aerodynamic Optimization Design and Research on the Hinged Droop-nose Multi-element Airfoil for Large Aircraft[J]. Civil Aircraft Design and Research,2014,(1):11-. ( in Chinese)

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2014-04-16
  • 出版日期:

微信公众号二维码

手机版网站二维码

我要投稿 投稿指南 联系我们 二维码
TOP